HD Smoke Detector Camera(DVR-0031)User Guider

The smoke detector camera is powerful with multi-function of Snapshot,Remote Control and Motion Activated. Below is wiseupshop smoke detector camera's related introduce:

Smoke Detector Camera

1. Indicator Light       2. Camera Lens       3. USB Port                    4. Power On/Off Switch       5. SD Card Slot
6. Camera Button     7. Motion Detection  8. Audio Record Button  9. Video Button                   10. Power On/Off Button

Operation

Please make sure the spy equipment is fully charged before using.
Please make sure the Micro SD card is securely fitted into the SD card slot on your camera. Camera will not work without a Micro SD card.
Please make sure the power on/off switch has been turned on.
Please make sure you have pointed the remote control to the device every time you press the buttons.
Please make sure you have removed the insulating film from the remote control.

POWER ON/OFF

Press the Power On/Off button for 3 seconds.
The red light and blue light will both turn on, then the red light stays on and the blue light turns off and the camera will automatically enter into standby mode.
Power off the camera by pressing the Power On/Off button for 2 seconds,until the indicator light turns off.

VIDEO RECORDING

Power on the smoke detector camera by holding down the Power On/Off button.
Press the Video button once and the camera will automatically enter into video record mode.
The red light will flash twice then turn off indicating the camera is recording video.
To stop video recording, press the Video button once and the camera will enter into standby mode and the indicator light will be solid red.

CAMERA/STILL PHOTOGRAPHY

Power on the camera by holding down the Power On/Off button.

From standby mode, the indicator light will be illuminated red, which will allow you to begin taking pictures.

Press the Camera button every time you want to take a photograph.

The indicator light will flash blue every time you take a picture.

AUDIO RECORDING

 Power on the smoke detector camera by holding down the Power On/Off button.
Press the Audio Record button once and the camera will automatically enter into audio record mode.
The blue light will flash 3 times then turn off indicating the camera is  recording audio only.
To stop audio recording, press the Audio Record button once until the  indicator light turns on and stays red

MOTION DETECTION RECORDING

Power on the camera by holding down the Power On/Off button.
Press the motion detection button once and the camera will automatically enter into motion detection mode.
The blue light and red light will both flash twice then turn off indicating the camera will record videos automatically when it detects motion.
To stop motion detection mode, press the motion detection button once and the indicator light will turn on and stay red

3 thoughts on “HD Smoke Detector Camera(DVR-0031)User Guider”

  • Brendan

    I bought 2 smoke detector cameras and both did the exact same thing they recorded two videos on motion detection and shut down when I try to power them back up the red comes on then the blue then they both blink rapidly.

    Reply
  • Justin

    Yes same here, battery is full and card has full space on it. But all i get is the two leds flashing rapidly. What does this mean?????

    Reply
Leave a Reply